50 Tips Help Your Pc Faster

17 August 2009 8 views No Comment

Do you have a problem with your PC speed? Do you need good tips to help your PC Faster than before?

Please read from the 50 tips help your PC faster below:

1. Update the BIOS

Upgrading your PC’s BIOS, or firmware in other devices like the router, could be a quick way to improve performance, fix bugs and even add new features. Look for the current BIOS version number on your boot screen or in the BIOS set-up program and then visit the manufacturer’s site to check for recent upgrades.
2. Disable unwanted devices

Speed up the boot process by turning off motherboard devices that you’re not using, such as integrated sound, graphics, extra network ports and so on. Look for a BIOS set-up menu called something like Integrated Peripherals to find the options that you need.

PCP284.feat1.disable-420-420-100

Once Windows starts, launch Device Manager (devmgmt.msc), locate any remaining unwanted devices, right-click them and select ‘Disable’ to save more resources. Be careful, though – disable the wrong device and you’re likely to find that your PC won’t be able to reboot. If you’re in any doubt about what a service does, look it up on the internet or leave it well alone.
3. Kick-start your PC

Optimising your BIOS settings will make for a quicker boot. Turn off the extended memory test, since it’s useless, then turn on a QuickBoot or FastBoot mode (the names may vary) for a little extra speed.

Next, browse your BIOS set-up program looking for the boot order settings (often found under a Boot or Startup | Boot menu), which is a list that determines where your system looks for bootable devices.

Make sure that your hard drive comes right at the top of the list to avoid your system wasting time checking other devices. If you need to boot from CD later on (typically to install a new operating system or run a Live CD), you can temporarily change it back.
4. Get rid of USB checks

If you leave a USB drive connected to your PC and it appears in the boot order before your hard drive, then your PC will give the drive some time to initialise before checking whether it’s bootable. In some BIOSes this time is called the USB Mass Storage Delay, and it can be determined by you.

If you never boot from a USB drive then set this to the lowest available figure to minimise any delay. If you find that you need to boot from a USB device in the future, simply increase the figure again.
5. Overclock the CPU

Overclocking your CPU – or running it faster than its rated speed – can get you 10 to 20 per cent more performance for a few minutes’ work. There are risks, though. More speed means more heat and maybe more voltage too.

You’ll use more power, and components will have a greater chance of failing – so don’t try this unless you’re willing to accept the risks of doing so. Assuming you are, launch your BIOS set-up program and look for the overclocking settings (try the Advanced menu). Exactly what’s available depends on your hardware, but in principle increase your CPU and memory frequencies just a little.
PCP284.feat1.occt-420-420-100

Boot your system and stress-test it with tools such as memtest86+ and OCCT to confirm that all is well. If it is, increase the frequencies a little more, and see what happens; if not, reduce the frequencies or increase the voltages (VCore, memory voltage), which should allow you to run a little faster (although doing this also risks burning out your components).

Don’t do anything until you know what’s appropriate for your hardware, though. The Extreme Overclocking forum is a great place to find out more.